Even then I don't feel like I'm getting much movement, instead it looks like the piston is just compressing the very end rather than moving it back and forth. Took a minute to adjust how much pressure I needed to apply to get full range of the piston but to still be engaged by it. At first the piston is getting stuck so I move outwards, but then it feels like nothing is happening except the rapid noise. I switch it off for now.Īctivating "squeeze" mode is a flop. But vibration alone does not make a robot. The 7 vibration patterns are unique enough, I preferred the 5th which is smooth ramping. Great! To be clear: it is only generated in one spot, the paddle opposite the window (so currently underneath). Now that I'm inside I turn on the vibration function. The onahole's entrance is firm, and the inner texture is a pleasurable series of nubs but has a limited mass to hold itself together so I wouldn't want to use it outside its case. I won't be bothering to use the voice feature again at least it doesn't have a literal speaker like the first Roid model! The sample lubricant was excellent. The inline controls do not control volume or playback, and they do not control Roid 2 itself which seems a missed opportunity. Plugged in the included earbuds and activated the 10 minute voice loop, it plays at an insane volume making it just a very low quality speaker while the 2 LEDs in the window smoothly color cycle. I mounted Roid 2 to a flat wood surface at standing height, and set a horizontal angle with the window facing upwards. After preparing the hole, reinserting it took a minute but turning on the squeezing function as the manual suggests made it easier. Roid 2 screws onto the mount, and there is a flat nut on the mount for a solid connection. There is 145° of toothed pivoting that's locked in with a wing nut. It uses a slide lever with a locking position for suction. The mounting system is excellent, the suction cup held to multiple barely textured walls (but not all), sealed wood, and of course glass. I wonder how many sessions the 1,100 mAh battery charge will last? ![]() ![]() The initial charge took an hour, the instructions state to only use Roid 2 for 30 continuous minutes before allowing it to cool down.
0 Comments
Leave a Reply. |